AutoCAD MCQ: AutoCAD Multiple Choice Questions

AutoCAD MCQ with answers and explanations for placement tests and job interviews. These solved AutoCAD MCQs are useful for the campus placement for all freshers including Engineering Students and experienced Engineers.

Our AutoCAD MCQ (AutoCAD Multiple Choice Questions ) focuses on various parts of the AutoCAD (commercial computer-aided design (CAD) and drafting software application). It will be useful for anyone learning AutoCAD Basics, Essentials, and/or Fundamentals. We will regularly update the quiz and most interesting thing is that questions come in a random sequence. So every time you will feel new questions.

You may have come across several AutoCAD courses during your search for learning AutoCAD. Our team of experts has carefully analyzed some AutoCAD courses for you. You can check the courses, Trial of some courses is free.

 

Guideline of AutoCAD MCQ:

This AutoCAD MCQ is intended for checking your AutoCAD knowledge. It takes 50 minutes to pass the AutoCAD MCQ. If you don’t finish the AutoCAD MCQ within the mentioned time, all the unanswered questions will count as wrong. You can miss the questions by clicking the “Next” button and return to the previous questions by the “Previous” button. Every unanswered question will count as wrong. MCQ on AutoCAD has features of randomization which feel you a new question set at every attempt.

In this AutoCAD MCQ, we have also implemented a feature that not allowed the user to see the next question or finish the AutoCAD quiz without attempting the current AutoCAD MCQ.

1 votes, 5 avg

You have 50 minutes to take the Autocad MCQs

Your time has been Over.


AutoCAD MCQ

AutoCAD MCQ: AutoCAD Multiple Choice Questions and Answers

1 / 48

A crossing selection selects what objects?

2 / 48

AutoCAD uses coordinates as the basis of all drawings. The coordinate system is always displayed in the bottom-left corner of the Model tab. In a regular 2D drawing, what axis notation is used for the horizontal and vertical coordinates?

3 / 48

External reference files (XREFs) link external drawings to the host drawing. You can set the XREF path type to no path, relative path, or full path. What value should be used for the relative path type?

4 / 48

In a standard AutoCAD installation, what does rolling the mouse backward do?

5 / 48

When working with objects in your drawings, you normally define their properties via their respective layers. However, you can define individual object properties with the Properties panel on the Home tab of the AutoCAD ribbon. Individual color and linetype can be defined there, along with what other typical object property?

6 / 48

When using coordinates in your drawings, you may need to get an exact coordinate value of a point. For example, it might be the corner of an object for setting out purposes, or the center of a circle for modifying the circle's position. What command do you use to obtain a point's exact coordinate value?

7 / 48

You have an application using a 100 GB MySQL database that you are migrating into AWS. What should you consider when deciding between whether to host the database on RDS for MySQL or Aurora?

8 / 48

In order for object snap tracking to function effectively, what other drafting setting must be switched on?

9 / 48

When an inserted block is selected, a single grip is displayed on the block, as shown in the image below. What is this point known as when the block is created with the Create Block (BLOCK) command?

10 / 48

Center Mark (CENTERMARK), a new annotation tool for circles and arcs, provides an associative center mark that can be edited easily and remains associative to its geometry. Which AutoCAD system variable controls the extension line overshoots that go past the circumference of the circle or arc?

11 / 48

What specific annotation setting must be in place in order to place a text annotation in a drawing?

12 / 48

When working in a layout, if a viewport is activated and locked and you accidentally zoom in or out, what happens to your viewport scale?

13 / 48

Multileaders are defined with a multileader style, which can have text (MTEXT), a block, or nothing added to the multileader line coming from the arrowhead. When using the block option for multileader content, default blocks are available with attributes for easy annotation; a user block can also be defined. Where does AutoCAD first look for the user blocks that can be used with multileaders?

14 / 48

AutoCAD allows you to select individual objects cumulatively to create a selection set. You can remove individual objects from that selection by using a mouse click combined with which keystroke?

15 / 48

In a complex drawing, it is sometimes difficult to select the geometry you wish to modify. You might want to move, scale, or rotate geometry and make sure the appropriate objects are selected. You can do this with window and crossing selections, but what other selection method can make this easier?

16 / 48

The Text Align (TEXTALIGN) command does more than just align text vertically or horizontally. Which TEXTALIGN setting allows you to set up evenly aligned text to a defined spacing in a drawing?

17 / 48

Linetype Scale (LTSCALE) is applied to what sort of linetypes in AutoCAD drawings?

18 / 48

When using the MOVE or COPY command, what is the first point that you must select?

19 / 48

AutoCAD allows you to create elliptical arcs in drawings. When creating one of these arcs, which default drafting rule do you need to follow?

20 / 48

When you are in a drawing and want to make an object's layer the current drafting layer, what command can you use?

21 / 48

A circle has five grips: a center grip and four quadrant grips. When using the Tan Tan Radius (TTR) method to draw a circle in a right-angled corner, which of the two quadrant grips will be touching other objects?

22 / 48

System variables can be monitored in AutoCAD. When monitored, they can also be reset to preferred values. What command is used to control these system variables?

23 / 48

When using the ELLIPSE command with the Axis, End, and Center methods, how many axes are needed to form an ellipse?

24 / 48

Where would you find the Application menu in AutoCAD?

25 / 48

There is often a need to hide or isolate selected objects, especially in complex drawings when detailing geometry. Where would you find the Isolate menu option—which is not on the ribbon?

26 / 48

When you use the ARRAY command to create copies of objects in AutoCAD, what do you use to orient a rectangular array?

27 / 48

When using the Multiple Points (POINT) command, which specific AutoCAD setting should you change from the default setting?

28 / 48

When working in a layout, if a viewport is activated and unlocked and you accidentally zoom in or out, what happens to your viewport scale?

29 / 48

When using HIDE or ISOLATE in a drawing, the objects are either hidden or isolated for clarity. What happens to the layers of hidden or isolated objects?

30 / 48

Dimensions in a drawing can be spaced automatically with the Adjust Space (DIMSPACE) command. You can specify a distance between spaced dimensions or you can use the Auto option. What does Auto do to the dimensions being spaced?

31 / 48

Which command opens a folder where you can start the Add-a-Plotter wizard?

32 / 48

An inscribed polygopoln gives you what type of point at the end of the polygon radius?

33 / 48

By default, all of the ARRAY commands make their respective arrays associative and group the selected objects in the array. What command would you use to convert the selected array into individual AutoCAD objects?

34 / 48

Sometimes you will need to match properties of one object to another using the Match Properties (MATCHPROP) command. When matching the properties of an existing viewport to a new one, which setting do you turn off in Match Properties to ensure that the viewport scale is not matched across to the new viewport?

35 / 48

You can share tool palettes with other AutoCAD users, provided that the palette source drawing location does not change. What file do you need to share to ensure that another user is using the same tool palette?

36 / 48

When drafting with object snaps and object snap tracking, what other drafting setting can you use to set object snap tracking points?

37 / 48

What type of coordinate is given when using the ID Point command?

38 / 48

One of the benefits of a locked viewport in a layout is that you can activate it and work through the viewport on the objects and annotation in the model space, without worrying about affecting the viewport scale. What is the space in the activated viewport commonly known as when you do this?

39 / 48

Dynamic Input (DYNMODE) is switched on by default. Which function key do you use to control the Dynamic Input toggle?

40 / 48

When using annotative scaling with dimensions and an annotative dimension style, which two variables need to match for the dimensioning to display in a scaled viewport?

41 / 48

When drawing a group of line segments with the LINE command, which command on the right-click shortcut menu allows you to form a closed boundary and snap back to the start point of the first line segment?

42 / 48

When using palettes in AutoCAD, why would you dock a palette and then use the auto-hide function?

43 / 48

The LAYOFF command turns off the layer of any selected object. What happens if you select an object on the current drafting layer?

44 / 48

When using the Edit Polyline (PEDIT) command, there may be occasions when you want to join line segments that have a gap. The PEDIT command can close these gaps automatically using a specific workflow. What is that workflow?

45 / 48

When scaling a drawing from imperial feet and inches to metric millimeters, what scale factor do you use in the SCALE command, before adjusting your units settings?

46 / 48

When drawing line objects in a drawing, you may use coordinates to define distance and direction. One type of coordinate is a relative coordinate, which is relative to the last point specified—often the second point when drawing a line using the LINE command. What prefix symbol should you type in front of 2D X,Y coordinates to ensure that AutoCAD knows it is a relative coordinate input?

47 / 48

You can dimension objects in AutoCAD from the Annotation panel on the Home tab of the ribbon. Where else can you dimension on the ribbon?

48 / 48

When using the OFFSET command, you specify an offset distance and then select the object you want to offset. How do you then specify which side of the original object to offset?

Your score is

The average score is 0%

0%

Recommended Articles for you: